| 測試電流 |
|
| |
AC 3A ~ 32A |
| 測試電壓 |
| |
最大 8V AC Typically |
| 量測阻抗範圍 |
| |
0 to 0.12Ω, 0 to 0.6Ω共 2 檔 |
| 量測準確度 |
| |
3A ~ 5A, +10% 滿刻度 5A ~ 32A, +5% 滿刻度 |
| 電流錶 |
| |
顯示測試電流及警告設限值 |
| 阻抗錶 |
| |
顯示測試電阻及 Fail 與 SUBTRACTION 設定值 |
| 切換開關 |
| |
Zero-start operating switch |
| 計時器 |
| |
1S, 10S, 1MIN, 10MIN 共 4 檔 |
| 警告 |
| |
Monitor the variation test current, when the test current is beyond+10% of the setting value, the warning operation will proceed. 警告設定範圍 3A ~ 32A |
| SUBTRACTION |
| |
The resistance of testing line can be subtracted from the test value The subtraction range from 0 ~ 0.1Ω 準確度 +10% |
| GO-NOGO判定設定 |
| |
If the test reading value is beyond the setting value, the fail will be acting, otherwise the pass will proceed. 設定值範圍,為測試檔位的 5% ~ 100% 準確度 +15% 滿刻度 (3A ~ 5A);+10% 滿刻度 (5A ~ 32A) |
| 遠端控制 |
| |
高電壓輸入 11V ~ 15V, 低電壓 0 ~ 4V 及低電流輸入 20mA 以下 |
| 測試模式 |
| |
正常模式: 當警告聲響起,測試停止 連續模式:當警告聲響起,測試仍持續進行 |
| 蜂鳴器 |
| |
當測試失敗時,提供蜂鳴聲 |
| 測試頻率 |
| |
50Hz 或 60Hz independent 視電源電壓而定 |
| 輸出信號 |
| |
TEST, GO, NG, WARNING, READY, MONITOR |
| 使用電源 |
| |
交流 100V/120V/220V/240V+10%, 50/60Hz |
| 附件 |
| |
電源線 x 1, 操作手冊 x 1, 測試線 GHT-115 x 1 |